USB Driver

Qualcomm QDLoader HS-USB Drivers Setup File for 32/ 64bit system

Qualcomm QDLoader HS-USB Drivers

If you are looking to Download Qualcomm QDLoader HS-USB Drivers Setup File for 32/64bit system, then you have arrived at the right place. In this article, you will get the direct links to download QDLoader Drivers and guide to install Qualcomm QDloader USB drivers setup file that you can use on a 32 or 64-bit computer. We have also covered the method to So here you go –

What is Qualcomm QDLoader HS-USB Drivers Setup File?

Qualcomm QDLoader HS-USB Drivers Setup File is an installer tool to install Qualcomm Snapdragon QDLoader HS-USB Drivers. Now the users do not have to manually put the drivers in the right location. All one has to do is open the file, run it and your job is done.

This tool helps you connect your Snapdragon processor powered device with Windows PC. Since a lot of famous brands using Qualcomm Snapdragon chipsets on their devices, installing the Qualcomm USB Driver is necessary.

It will ensure the strong and stable connection between the PC and your Android device. Additionally, it will help you to transfer files, flashing on your device via your computer.

You might now think that Xiaomi has already provided with the crucial drivers in-built in the Xiaomi Flash tool.

Although this tool consists of all the essential drivers, this only implies when the MIUI device can boot to either Fastboot mode or Recovery mode.

Qualcomm QDLoader HS-USB Drivers

Disclaimer-

We at xiaomijungles.com are not responsible for any sort of damage caused to your device while using the below tool. This tool works deeply on the hardware. Use it at your own peril.

Download Qualcomm QDLoader HS-USB Drivers Setup File

Before actually downloading the below files, Make sure that you have checked the Windows system- 32 bit or 64 bit. And only then the below files.

This tool is Applicable for any Xiaomi MIUI device with Qualcomm chipset. Also, make sure to follow the below prerequisites-

Prerequisites –

  • Download and install Mi PC Suite for the Xiaomi MIUI device.
  • Download and install ADB Drivers and Fastboot Drivers on your computer.
  • A Windows computer or Laptop 7/8/8.1/10.
  • Working USB Cable.
  • Download Qualcomm QDLoader from a link given below.

Note that due to the Signature Enforcement policy, the setup file may not install. This usually occurs on the 64-bit system.

Given below are two different Qualcomm drivers setup files of which one is for 32 but Windows system and the other is for 64 bit Windows system. Both the files have been taken from the official Qualcomm server and are original and unmodified.

Qualcomm Drivers Setup file for Windows 32 bit

Qualcomm Drivers Setup file for Windows 64 bit

How to install Qualcomm Drivers Setup file?

Direct Method

  1. Download Qualcomm drivers setup file from the links given above.
  2. Then extract the file either by using WinRar or WinZip.
  3. Select the Setup as “Free Bld” and then click on the Next button.
  4. You will now be given some instructions on the Qualcomm USB Drivers for Windows – InstallShield Wizard.
  5. Follow them all.
  6. You will be asked to accept the License Agreement Terms. Accept them all and then click on the Install button.
  7. Once done, click on the finish option to terminate the process.

Install Qualcomm Drivers Setup File Manually

  • Download Qualcomm drivers setup file from the links given above.
  • Extract this file using either WinZip or WinRAR.
  • Now Enable USB Debugging on your Xiaomi device. For this, go to Settings>About Phone> Tap 7-8 times on Build Number. The Developer Options will now be enabled.
  • Now enable USB Debugging by going to the Settings> Developer Options> USB Debugging> Enable.
  • Using USB Cables, connect your Xiaomi device to the PC.
  • Boot your Xiaomi phone into Download Mode or EDL Mode.
  • Then open the Command Window by pressing the Shift Key+ Right Click on Mouse together.
  • Now enter the below command and then hit Enter so as to see if your device has been detected or not –
adb devices
  • A device Serial Code will now be shown on the screen. This indicates that your device has been successfully connected.
  • You have to then enter the below command and press the Enter button so as to Boot Xiaomi device into Download Mode
adb reboot edl
  • Now go to the Control Panel>Device Manager on your PC for installing the driver.
  • Your device will now be listed there even if the driver for the device has not been installed properly yet.
  • Then you have to right-click on QHSUSB_BULK and select Update Driver Software.
  • You will be now prompted. Just choose – Browse my computer for driver software.
  • Then Hit the browse button and look for the unzipped Qualcomm QDLoader Driver Package folder from it.
  • The Drivers will now start installing on the system.
  • Grant the permissions you are asked for. Or you can also select ‘Install this driver software anyway’.
  • Lastly hit the Close button so as to exit the installation.

The Qualcomm HS-USB QDLoader 9008 (COM10) Drivers will now be successfully installed on your PC.

How to Manually Update Qualcomm HS-USB QDLoader 9008 Driver

  1. Follow the above steps from Manually Installing Qualcomm HS-USB QDLoader 9008 until the step where you see – QHSUSB_BULK.
  2. Just right-click on this and choose – Update Driver Software option.
  3. You will see a new dialog box here. To update Qualcomm QDLoader 9008 driver, just choose – Browse my computer for driver software option.
  4. Then hit the ‘Browse‘ option and choose the earlier extracted Qualcomm QDLoader Drivers from the PC.
  5. The installation of Qualcomm Drivers will now begin on your PC. Be patient until then.
  6. You will be prompted with a message – Windows Can’t Verify the Publisher of this driver Software.
  7. Here, click on Install the driver software anyway.
  8. Finally hit the finish button and then go to Control Panel> Device Manager. Under the PORT Section, you will see the Qualcomm HS-USB QDLoader 9008[COM 10].

That’s how easy it was to download, install and update Qualcomm Setup drivers. I hope you liked the article. Comment down below in case of any doubts.

Keep visiting 🙂

About the author

Ashish Patel

Add Comment

Click here to post a comment